The auction has been closed.
48V 500W Rear Hub Motor
DIY rear wheel ebike conversion kit for bicycle with rear drop out size "128 to 148 mm" flywheel below 9 Speeds.Compatible with the disc brake, has a rated power of 500W, providing ideal power for vehicles. Greatly enhances riding comfort and is suitable for touring bikes, commuter bikes and mountain bikes.
Motor Type:Rear wheel motor 500W
Display:Bafang Display C961/C965---opational
1.Bafang hub Motor * 1pcs
2.Bafang Display C961/C965/850C---Optional * 1set
3.Brake lever * 1 pair
4.Thumble throttle * 1set
5.PAS * 1pc
6.Controller * 1pc
7.Controller case * 1pcs
8.Rear wheel * 1pcs
9.Extension cable * 1pcs
10. 1T4 Cable * 1pcs
What is the max voltage this motor can handle?
The 36V model should only be powered by an 36V battery, when fully charged a 36V battery will actually produce 42-43V approximately as to where a 48V battery will put out 54.6V.
Which bike can use this motor kits?
The rear drop out size(OLD in the picture) shall be 135-142mm, the disc brake Diagonal hole distance: 44MM; Adjacent hole distance: 22MM, please see the sixth picture for installation.
Does the battery come with the motor kit?
If you want the battery, please select the battery on the choice of sizename, if not, the pacakge will not contain the battery.
What is the difference between the freewheel and the cassette?
The gear shift is different, please see the third picture.